1. Unclogging Drains With Boiling Water and Baking Soda

If your sink or bathtub is clogged, you can try unclogging it with boiling water and baking soda. First, bring a pot of water to a boil. Then, add a cup of baking soda to the boiling water. Slowly pour the mixture down the drain. The boiling water and baking soda will help to break up the clog. Flush the drain with hot water to remove any residue.

2. Replacing a Garbage Disposal
If your garbage disposal is on the fritz, never fear! Replacing a garbage disposal is a relatively easy task that you can do yourself in just a few simple steps.

First, disconnect the power to the garbage disposal by unplugging it from the wall or shutting off the circuit breaker. Next, use a hex key to loosen the mounting bolts that hold the unit in place. Carefully remove the old garbage disposal and set it aside.

Now it’s time to install the new garbage disposal. Start by firmly attaching it to the sink using the mounting bolts. Once it’s secure, reconnect the power and test out the new unit by running some water down the drain and turning on the disposal. If everything is working properly, you’re all done!

3. Use Handy Plumbing Tape to Avoid Leaks

Handy plumbing tape is a great way to prevent leaks in your home. This type of tape is made of a special material that helps to seal around pipes and fittings. It is easy to apply and can be found at most hardware stores. When using this type of tape, be sure to follow the manufacturer’s instructions carefully.

4. Make DIY Drain Cleaners from Household Items

Drain cleaners are one of those necessary evils that every homeowner has to deal with at some point. They can be expensive, and sometimes they don’t even work. But there are a few ways you can DIY your own drain cleaner from household items.

One way is to mix together equal parts baking soda and vinegar. This mixture will create a fizzing reaction that can help break down any grime or buildup in your drains. Just pour it down the drain and let it do its thing for a few minutes before flushing it with hot water.

You can also use boiling water on its own to clear out minor clogs. Just be careful not to do this too often, as it can damage your pipes if used too frequently. Another option is to mix together 1/2 cup each of salt and baking soda, then pour down the drain and follow with boiling water. This should only be used as a last resort, as it can also damage your pipes if used too often.

5. Prevent Water Hammer with a Pressure Reducing Valve

Water hammer is a common problem in plumbing systems. It occurs when water flow is suddenly reduced or stopped, causing a sudden increase in pressure. This can damage pipes and fixtures, and cause a loud banging noise.

A pressure reducing valve can help to prevent water hammer by regulating the water pressure in the system. This will help to avoid sudden changes in pressure that can cause water hammer.

6. Learn the Differences Between Flexible Pipes and PVC Pipes

Flexible pipes are made of materials that can easily be bent or shaped, making them ideal for tight spaces. PVC pipes are made of a rigid plastic and cannot be bent or shaped. They are often used for drainage and sewer applications.

7. Check for Leaks Around Exterior

If you want to avoid costly repairs and water damage, it’s important to regularly check for leaks around your home’s exterior.